You will need:
- Construction adhesive (e.g., LePage)
- Disposable rag or cloth (to clean off any excess adhesive)
- Masking tape
- Level
- Measuring tape
- Pencil
- Wood filler, drywall compound, or spackle (to fill in any visible seams)
- Fine-grit sanding block (to smooth the seams afterward)
If you choose to use a Brad nailer: you'll need nails rated for your nailer, at least 1 1/2” long. Please set your nailer to a lower pressure setting, as polyurethane is a soft material.
How to install:
- Prepare the wall: Ensure it is clean and dry.
- Mark the wall: Using a measuring tape and pencil, mark your distances on the wall according to the provided diagram. Double-check your measurements. Note that most walls are not perfectly square, but these variances are usually inconspicuous.
- Layout the trim: Lay all the trim pieces on the floor according to the diagram, and mark the wall with a pencil where each panel should go.
- Adhesive option:
- Option 1: Apply a small amount of construction adhesive to the corners of the trim pieces. Wipe away any excess with a rag. Let it dry according to the adhesive’s recommended drying time.
- Option 2: If you don’t have an extra pair of hands to place the entire panel, you can skip this step and attach each piece to the wall separately. Ensure that you’ve marked the wall for where each piece will be placed.
-
Install the trim:
Use a level to ensure proper placement and start adhering the trim panels to the wall in the measured spots using either a Brad nailer or construction adhesive. If using adhesive, masking tape can hold the pieces in place while drying. -
Adjust as needed:
Our trim pieces are cut to exact specifications. If you’re installing a chair rail or board-and-batten-style trim and the fitment feels too tight, gently sand a small amount of material off to ensure a perfect fit. -
Fill seams and holes:
Use wood filler, drywall compound, or spackle to fill in any visible seams or nail holes (if using a Brad nailer). Let it dry. -
Sand:
Use a fine-grit sanding block to smooth out the filled seams and holes. -
Paint:
You’re now ready to paint the wall and trim!
Important Note:
Please keep in mind that trim pieces are considered raw products. Minor imperfections are normal and can be easily fixed with wood filler, drywall compound, or spackle during the installation process. These products are designed to be finished after installation.